stellite 6 UNS R3006 cobalt alloy bar

 

 

 

Material grades and equivalents: Stellit 6; UNS R3006; AMS 5387C-2001

Introduction:

STELLITE 6 is the most widely used of the wear resistant cobalt-based alloys and exhibits good all-round performance. It is regarded as the industry standard for general-purpose wear resistance applications.

Stellite 6 Chemical components

C	Cr	Si	W	Fe	Mo	Ni	Mn	B	Co
1.2	28	1.1	4.5	3		3	1		bal
*The chemical composition shown above is an outline only,and should not be taken as a full specification. *Note that cored wire may have higher Fe contents than other product forms.

 

Stellit 6 Physical property (Room Temp.)

Density (lb/in³)	Specific Gravity	Solidus	Liquidus	Specific heat (J/kg·K)	Magnetic Permeability	Electrode Potential	Electrical Conductivity	Electrical Resistivity
0.305	8.46	2340°F	2540°F	0.101°F Btu/lb-	<1.2@200 Oersteds	-0.25 Volts	1.9%IACS (Int. Annealed Copper Std.)	41.73 microhms-inch

 

Stellite 6 Thermal Properties-Conductivity & Expansion

Thermal Expansion Coefficient				Thermal Conductivity by Temperature
°F	Microinch/ inch-°F	°C	Microns/ m-°C	°F	Btu/ft2/in/ hr/°F	°C	W/mk
212	6.3	100	11.34	70	102.7	21.11	14.82

ear parts of widia sheet tungsten carbide plate

Technological process: of tungsten sheet/plate and W cube

 

                                                                        finished product

Packaging: 

of 95%wnife tungsten heavy alloy sheet plate 

Packing Details  : Plastic bags and kraft paper as inside, wooden case as outside.

Delivery Details : 2-15 workdays after order of tungsten carbide sheet, plate, foil, strip, cube, block and target.

 

FAQ:

1.How to get a quotation?

   Grade? Thickness? Width? length? Quantity? Application?

 

2.Do you accept customed?

   Yes, we can according to your drawings processing.

 

3.What is the shipping cost?

    It mainly depends on weight, volume, packing size and destination port.

 

4.What's your delivery time?

    In stock, 1-2 days, if not, according to your quantity.